St. Patrick’s Day Lucky Shamrock Sign

carved smoothfoam st patricks day sign

Everyone can always use a little extra luck, right? Well, here’s a fun tabletop decoration perfect for a Saint Patrick’s Day party, or as a cute gift for someone who just hit the jackpot. I used a hot engraving tool to add detailing to each letter, reminiscent of Celtic knots, and then outlined the word with a black paint pen to make everything pop. And although a four-leaf clover is the traditional symbol for good luck, I decided to add a little luck of the Irish with a three leaf shamrock instead. Hmm – I might just try my luck tomorrow and buy a lotto ticket!

Supplies:

2” x 4” x 12″ Smoothfoam block
Sulky Stick’n Carve Printable Transfer sheet
Proxxon Tabletop Hot Wire Cutter
Hot Wire Foam Factory Hot Knife and Engraving Tool
Acrylic paints – gold, dark green
Glitter – light green, dark green
Black paint pen
Paint brush / plastic dish
Scissors

Instructions:

1.  Click here to download my “Lucky Shamrock” artwork* and print it onto the Sulky transfer sheet. Because it is too long to fit onto one sheet, it’s tiled into two sections. Cut the sheet in half between the two lines of text. Peel off the backing paper and press the two pieces together to fit on the Smoothfoam block. Trim off the excess transfer sheet. Poke pilot holes with the hot knife into each area of the block that will be cut out.

Smoothfoam-Carved-Lucky-Shamrock-Decoration-by-Carmen-Flores-Tanis-Step-1

2.  Carefully carve out the Smoothfoam block with the tabletop hot wire cutter. Unthread and re-insert the wire into each pilot hole to make each interior cut.

Smoothfoam-Carved-Lucky-Shamrock-Decoration-by-Carmen-Flores-Tanis-Step-2

3.  Add details to the carving with the engraving tool as shown. Peel off the transfer sheet when finished.

Smoothfoam-Carved-Lucky-Shamrock-Decoration-by-Carmen-Flores-Tanis-Step-3

4.  Paint the carving gold. Let dry.

Smoothfoam-Carved-Lucky-Shamrock-Decoration-by-Carmen-Flores-Tanis-Step-4

5. Paint the shamrock green. While the paint is still wet, sprinkle with dark green glitter. Add a little more green paint to the center of the shamrock and sprinkle with light green glitter. Tap the carving to remove any excess glitter. Let dry.

Smoothfoam-Carved-Lucky-Shamrock-Decoration-by-Carmen-Flores-Tanis-Step-5

6. Outline the carved letters with black paint pen.

* You are welcome to use my original artwork for your own use or for a gift/donation only. You may not use my designs for items intended for resale – that is a copyright infringement. Thank you!

Leave a Reply

Your email address will not be published. Required fields are marked *