Ladybug Photo Holder Vignette

Smoothfoam ladybug photo holder

Here’s a cute idea for a handmade Mother’s Day gift – or this little ladybug DIY photo holder vignette could be adapted as a gift for a favorite teacher during National Teacher Appreciation Week (May 4-8).  I think the ladybug could even stand on her own!  Hope you are enjoying all of the new beginnings of spring! As you create this spiral wire photo holder, take time to enjoy the little blessings along the way and live life with a flourish!


6″ Smoothfoam disc
3″ Smoothfoam ball (cut in half)
Two 1-1/2″ balls (cut in half)
Craft paints:  Black, Red, Yellow, Green, Cream
Paintbrushes:  1″ flat, 1/4″ flat
Pencil with new eraser
Stylus (for paint dots)
18 or 20 gauge wire, wire cutters
Wood skewers, toothpicks
Green cardstock
Glitters: green, clear
Low-temp hot glue gun
Tacky glue
Scissors, pliers
Optional:  Hot wire foam cutter  (I use Marvy Uchida)


1.  Using a skewer as a handle for each Smoothfoam piece; paint and allow to dry:
Disc (base) – Antique Green; 3″ half-ball (ladybug body) – red;  1-1/2″ half-balls – one black (ladybug head), three yellow (mushrooms).

2.  Paint dots on the ladybug with the pencil eraser:  White eyes on the head, black dots on each side of the body. Highlight the dots with a stylus and tiny cream dip dots. Attach the head to the body with a toothpick and hot glue to secure. I also used a dot of hot glue to form a nose on the ladybug’s face.

3. To make the spiral wire photo holders, cut three 12″ pieces of wire. Bend a tiny loop at one end of one piece of wire; continue to bend it into a flat coil to get desired spiral shape to insert a photo.  Make a pilot hole in the middle of one yellow half ball. Poke the straight wire end through the pilot hole. Position the half ball and bend the wire back and forth just below the half ball.  This will hold it in place.  Poke the straight end into the green base. Use the wire cutters to cut the wire to the desired height.  Repeat for each piece of wire and yellow half ball.

4.  For the ladybug’s antennae, cut two 3″ pieces of wire. Bend the top end of one piece into a 1/4″ spiral. Repeat for the other piece. Poke into the top of the head. For her legs, cut four 3″ pieces of wire. Stick the front and back legs into the flat side of the red body. Push her evenly into the green base.

Smoothfoam ladybug and mushrooms

5.  Embellish the ladybug, mushrooms and base with glitters and glue.

6.  For the grass,  I used my die-cutting machine and a grass border die to cut green cardstock to wrap around the base of my vignette. Another option is to cut two 1-1/2″ x 12″ strips of cardstock and cut a fringe at the top edge for the grass.  Stamp a sentiment on the grass trim, then glue it to the Smoothfoam disc as shown.

This entry was posted in General Crafts and tagged , , , , by Marilyn Gossett. Bookmark the permalink.

About Marilyn Gossett

I am a wife, mom, pet lover and a woman who has had a lifelong passion for creating art and crafting! I have been a designer, author and consultant in the craft industry for many years and I've authored 40+ craft books. I enjoy working with many mediums and I'm privileged to be on a team of such talented designers. I hope that our viewers enjoy the collective creativity!

Leave a Reply

Your email address will not be published. Required fields are marked *